The most simple kit contains the LED Aluminium Profile with LED strip, the mounting clips, the wago connectors and the power supply module with 230V cord and plug. Screws are also included. With this kit you will use the socket switch for switching the light.
If you wish to use rf remote controller, you can update the current installation at any time without removing the profile. .
The under cabinet kit is made to the size you ordered and ready to solderless install. The installation is easy and takes a few minutes.
Mount the profile under the cupboard using double adhesive and/or with mounting clips.
Mount the power supply module under the cupboard by double tape adhesive or screws.
Connect the power supply and the LED strip cables using the quick connectors. Please take care of the polarity (plus to plus, minus to minus).
Hide the cables below the cupboard using tapes or clips. Connect the power supply module to the 230V socket, switch on the socket and enjoy your light.
IF YOU WISH TO USE RF REMOTE CONTROLLER TO SWITCH YOUR LIGHT YOU WILL NEED TO INSTALL AN RF RECEIVER/DIMMER BETWEEN THE POWER SUPPLY AND LED LIGHT STRIP. THIS PROCESS TAKES LESS THAN 5 MINUTES AND GIVES YOU EXTRA COMFORT.