Sensor LED strip switches

Motion sensor, door sensor, hand sweep sensor LED stirp switches

ER-3 2 Steps microwave motion sensor dimmer ER-3 2 Steps microwave motion sensor dimmer 2

Microwave Sensor 2 -steps Dimming RF Switch - ER3

ER-3
Active Microwave Sensor for 2 Steps Dimming  Built in motion sensor and Daylight sensor If the ambient light is not enough for movement the light switches on 100% If there is no movement after T1 time the brightness drops to 20%. If there is no further movement after T2 time the light is switched off. T1, T2 and the light sensitivity can be adjusted....
In Stock
€27.68 (€22.5 + VAT)
E1D Door Sensor Switch into LED profile or without led profile E1D Door Sensor Switch into LED profile or without led profile 2

Door Sensor Switch - E1-D

E1-D
Door Sensor Switch can be installed into LED profile Working with 12-24V LED Strips up to 4A (96W with 24V LED Strip)
In Stock
€6.84 (€5.56 + VAT)
E1B V1B Hand Sweep Sensor Switch E1B V1B Hand Sweep Sensor Switch 2

Hand Sweep Sensor Switch - E1-B (V1-B)

V1-B
Hand Sweep Sensor Switch - E1-B (V1-B) into LED profile Working with 12-24V LED Strips up to 4A (96W with 24V LED Strip)
In Stock
€6.84 (€5.56 + VAT)
EH-R PIR MOTION LED SENSOR CONTROLLER EH-R PIR MOTION LED SENSOR CONTROLLER 2

Ceiling PIR Motion Sensor LED Strip Switch - EH-R

EH-R
Ceiling mounting PIR motion detectors with built-in daylight sensor. Controlling 0/1-10V dimmable driver or dimmer Controlling RF dimmable driver or RF dimmer (works as RF Remote Controller) Works with RF single color dimmer and dimmable drivers as dimmer and switch Works with RF CCT, RGB, RGBW and RGBCCT dimmer and dimmable drivers as switch Switching...
In Stock
€21.13 (€17.18 + VAT)
EH-M MICROWAVE MOTION LED SENSOR CONTROLLER EH-M MICROWAVE MOTION LED SENSOR CONTROLLER 2

Ceiling Microwave Motion Sensor LED Strip Switch - EH-M

EH-M
Ceiling mounting microwave motion detectors with built-in daylight sensor. More sensitive and covers larger area than PIR sensors. Controlling 0/1-10V dimmable driver or dimmer Controlling RF dimmable driver or RF dimmer (works as RF Remote Controller) Works with RF single color dimmer and dimmable drivers as dimmer and switch Works with RF CCT, RGB,...
In Stock
€24.60 (€20 + VAT)
es32 stairs controller es32 stairs controller 2

Stair light controller - ES32

ES32
ES32 - multifunctional Stair Light controller from SKYDANCE Controls up to 32 steps with normal white LED strips or pixel strips Controls stair rail pixel white or pixel RGB light Controlled by motion sensors (top and bottom) and or push switches (top and buttom) White step mode, step + rail mode, Pixel RGB step mode, Pixel RGB step + rail modes...
In Stock
€81.18 (€66 + VAT)
E1-L ED(c) DOOR SENSOR SWITCH E1-L ED(c) DOOR SENSOR SWITCH 2

Door Sensor LED Dimmer kit E1-L+ED(C) 12-48VDC 8A

E1-L-ED(C)
Door Sensor Switch LED Dimmer kit E1-L+ED(C) Working with 12-24V LED Strips Working up to 8A current When the door opens the light turn on with fade on effect (E1-L works with motion sensor, door sensor, wood touch sensor and hand sweep sensor)
In Stock
€16.00 (€13.01 + VAT)
WOOD TOUCH PROXIMITY SENSOR WOOD TOUCH PROXIMITY SENSOR 2

Wood touch sensor LED Dimmer kit E1-L+EW 12-48VDC 8A

E1-L-EW
Wood touch sensor LED Dimmer kit E1-L+EW For switching on/off and dimming the LED strip.  Working with 12-24V LED Strips Working up to 8A current Working with up to 5cm timber (with standard board works as proximity sensor) (E1-L works with motion sensor, door sensor, wood touch sensor and hand sweep sensor)
In Stock
€16.00 (€13.01 + VAT)
E1-L-EB(c) SWEEP SENSOR KIT E1-L-EB(c) SWEEP SENSOR KIT 2

Hand sweep sensor LED Dimmer kit E1-L+EB(C) 12-48VDC 8A

E1-L-EB(C)
Hand Sweep sensor LED Dimmer kit E1-L+EB(C) For switching on/off with soft on and off effect.   Working with 12-24V LED Strips Working up to 8A current (E1-L works with motion sensor, door sensor, wood touch sensor and hand sweep sensor)
In Stock
€16.00 (€13.01 + VAT)
door sensor switch 1A door sensor switch 1A 2

Door sensor switch - 1A for 3-6 LED strip - ED-V(C)

ED-V(C)
12-24VDC 1A Door sensing switch with 1.5m cable. 1 second light on/off fade 3m 8W or 6m 4W strip can be controlled PWM 2000Hz Ideal for cabinet lights holder is included.  Cable legth is 1500mm. 
In Stock
€7.38 (€6 + VAT)
Product added to wishlist
Product added to compare.

This website uses cookies to personalize content and ads, to provide social media features and to analyse our traffic. We also share information about your use of our site with our social media, advertising and analytics partners who may combine it with other information that you’ve provided to them or that they’ve collected from your use of their services. You consent to our cookies if you continue to use our website. More information and the cookie preferences are available on our Privacy Policy page.