SPI Controller - DUAL PIR sensor and push button control - ES-D

ES-D Multifunctional pixel strip controller

Works with Dual PIR sensor (included) and two push buttons
Ceiling light, stair light, hand rail light controller
Daylight sensor is included
2 x 5m PIR extension cables are included
Controls single addressable strip (WHITE, CCT and RGB)
Controls multiple addressable strip
Controlls steps (daisy chained pixel strip along the step)
Multiple controllers can work together in cascade mode
Speed, delayed off, brightness can also be setup.
Also works with RF handheld remote controllers!

Reference ES-D

In Stock

€29.50 (€29.5 + VAT)

(€29.50 per unit)

Dispatched within 24 hours.

Description

ES32 - multifunctional Stair Light controller from SKYDANCE

How to set up with our PIXEL RGB strips?

Setup as RGB --> "L-3"

How to setup with our CCT PIXEL STRIPS (COBD-560-10-CCT-24)?

for best result setup as RGB -->"L-3", pixel number 10/m
for cozy warm white chose Red color for animation
for warm white chose Orange for animation
for natural white chose Yellow for animation
for cold white chose Green for animation
OR setup the channels as you wish

How to setup with our WHITE PIXEL STRIPS (COBD-420-12-WW or HW-24)?

Set up as white pixel strip "L-2"
Setup the pixel number 30 / m

Multiple controllers can work together in cascade mode
When applied to stair light, supports four output modes: color flow, white flow, color step, white step
Can be switched with handheld remote controller
2 groups same SPI(TTL) signal output, drive 28 kinds IC digital RGB LED strip,
IC type and R/G/B order can be changed during the setup.
Compatible ICs: TM1804, TM1809, TM1812, UCS1903, UCS1909, UCS1912,
UCS2903, UCS2909, UCS2912, WS2811, WS2812, WS2815, TM1829, TM1914A,
GW6205, GS8206,GS8208,LPD6803, LPD1101, D705, UCS6909, UCS6912,
LPD8803, LPD8806, WS2801, WS2803, P9813, SK9822, SM16703P.
Easy operation with OLED display and 3 buttons.