ALP-003 15 mm Deep with Flange - LED Aluminium profile - 2m

LED Aluminium profile with FLANGE for recessed applications
Required routing channel min. 13 mm depth x 17mm width.
Less LED density is enough for dot free light !!!
Same as ALP-004 with flange. This is a deeper version of ALP-001.
Ideal for wall, plasterboard and furniture applications. See our how to section.
The high construction and opaque diffuser offers even light.
The price refers 2 m profile with diffuser, 2 end caps.
For LED strips up to 12mm - 3528, 2835, 5050, 5630, 5730.
Available in white for plasterboard/false ceiling (003-DW) application.
Extra endcaps and diffusers (PC opaque, milky, semitransparent, transparent, black and PMMA) are available.

Reference ALP-003

In Stock IF YOU NEED YOUR PROFILES CUT TO SIZE PLEASE CONTACT US. ---

€7.32 (€7.32 + VAT)

(€7.32 per 2m piece)

Dispatched within 24 hours.

Description

This 15 mm deep profile is a higher version of LX-001.

The more depth offers more even light. Less LED density is enough for dot free light than with lower versions !!!

Applications:

Built into plasterboard
Built into furniture (kitchen / office) lighting
Interior light designs (stairs / storage / floor)
Stores shelf LED lighting
Exhibition boot LED lighting
Heat sink and physical protection to the LEDs!!!

Features :

Extruded 6063 T5 Aircraft grade aluminium with Anodised surface
High quality diffuser, placing/removing from front on click
UV resistant
Available with opal matte diffuser
No LED dots shows on opal diffuser (high density LED ribbon)
Suitable for flexible as well as high power led bars
Available length – 2m (for larger length please contact us)
For indoor use only

NOTE! The price refers only to aluminum profile! Led strips are ordered separately.

This low-profile profile is best suited for 120 led/m led strips if an even light is desired. As a distance between the LEDs increased, slight bright spots can be appear.

Important note to light permeability: If the led strip luminous emittans without front plastic is 100% Lux, in a profile with semi-transparent cover decrease the light by 10%, in a profile with matt diffuser the loss is around 50%. So, matt diffusers provide more even light, but also decreased intensity. In practice, given the wide range of strong LED strips it does not cause any problem.